HTBARNES MK1 Meat Bandsaw

Additional information




2Hp (1.5 kW) TEFC Brake Motor 220 Volt, 60 Hz, 3-phase

Blade Speed

3500 ft /minute (1070 m/minute)

Saw Blade

1/2” (13mm) x 0.0236” (0.6mm) x 141-3/4” (3600mm) x 3 TPI Hard Tooth (Heat Treated)

Cutting Table

One piece 32.48” x 34.06” (825 x 865 mm) heavy duty 0.10” (2.5 mm) stainless steel


204 Kg


76.57” (1945 mm)

Floor Area

38.98” x 35.04” (990 x 890 mm)


  • Brake Motor stops blade rotation within approximately 1.5 seconds
  • Doors are Interlocked with Brake Motor for safety; cuts power when open
  • Automatic Correct Blade Tension
  • Safer, Reliable 24V Power Switch, 1 Start, 1 Stop, 1 Emergency Stop
  • 15.95” x 17.13” (405×435 mm) cutting capacity
  • Stainless Steel 304 with smooth grain finish on Head, Table, Base Structure and Legs
  • Both wheels are totally enclosed for safety yet readily accessible for cleaning and maintenance
  • Blade is safely guarded above and below the cutting area
  • Blade guard is safely wrapped around the cutting blade
  • Adjustable blade scrapers
  • Blade guide is tin plated steel with built in Tungsten Carbide back up
  • Blade cleaners are easily removed with the use of a small ring spanner
  • Balanced, corrosion resistant aluminum wheels
  • 1/2″ (13mm) wide blade generates less heat transfer into the meat being cut, and at less cost than a 5/8″ (16mm) wide blade, yet both have similar long cutting life
  • With (11) eleven 1/2” (13mm) x 0.0236” (0.6mm) x 141-3/4″ (3600mm) x 3 TPI Hard Tooth (Heat Treated) blades


  • 2Hp (1.5 kW) TEFC Brake Motor 220 Volt, 60 Hz, 1-phase